MDF Coaster

Sublimation  Square Gloss White Coaster

Product Features:

 Size: 3.5" x 3.5"

Instructions:

1. Remove the protective plastic coating if any from the substrate.
2. Align the substrate onto the transfer.
3. Tape two sides of the substrate to the transfer using the heat tape.
4. Place the transfer and substrate in the heat press with paper facing up.
5. Place butcher paper on top, if needed.
6. Press the items using the settings listed below.
7. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.
8. Remove the transfer immediately.

Heat press settings:
- Temperature - 380 degrees F
- Time - 60 seconds
- Pressure - light to medium

• The recommended settings above may need adjustments for best results. Settings will vary depending on the heat press brand and model ink and paper and atmospheric conditions.